SNOW PLOUGH NANOTECH - Snow blades/ploughs, small snow removing
Classification / General and building materials Features
snow plow truck with GVW between 35 to 60 q.li and agricultural tractors with power between 35 and 80 hp with 30q.li. weight.
Equipment Snow with a supporting steel structure and counter-plate quick fit conforms to the Statement of DIN 76060 / B. Front shear in one piece consisting HDPE polyethylene sheet. Knife scraping into two independent sectors, available in wear-resistant steel or neoprene (rubber). mechanical adjustment of the angle of the ground attack (incidence) .Production shock agent, using steel springs, exclusively on each of the wiper blade segment. These, in phase of collision with a rigid element, flex backwards (against the direction of travel) and, after passing the obstacle, are rotated in the vertical working position by the two pairs of springs. bearing structure in stove-enamelled steel with special anti-rust treatment and final enamel RAL 2011 (orange). Aileron HDPE black. overpressure valve for shock side impact, R2 pipes with fittings and standardized quick couplings.
Hydraulic, with hydraulic cylinders for tilting left / right and up / down.
Sources of energy
Electro-hydraulic power to 12 or 24 V can be installed on request (optional), the implement Snow. Alternatively, special hydraulic plant realized on the thrust means (2 distributors need to double effect of one or equipped with floating position).
Commands for handling
Pushbutton electro-hydraulic, with recommended length cable, combined with the electro-hydraulic control unit. Alternatively, commands already present on the vehicle if fitted with a suitable hydraulic system (es. Agricultural tractor).
Flags, standing parking, overpressure valve on the tilt circuit right / left and knife scraping wear steel, side KERBSTONES cover.
Knife scraping neoprene, marker lights, pair of pivoting wheels and height adjustable, pair of additional lights with support on the counter-plate, hydraulic power with cable and hand control, Rubber splash guard, twisted-pair cable with fuse for controller connection the battery of the vehicle, raw plate DIN / B vehicle side, work on the medium.
N.B. the blade weight is reduced of 10% approx. if it equipped with neoprene cutting edges.