The VMR V-plow in designed for hard winter conditions and it preferably fits trucks with GVW>100 quintals, agricultural tractors with power over 90 hp and weight > 45 quintals and 90 hp backhoe loaders or wheel loaders.
Completely made of high-strength steel and equipped with quick hitch plate for easy attachment complying with the standards DIN 76060/A.
Central body made of high-strength steel on which are jointed the side blades by means of N. 6 Hardox hinges.
Independent operation of the blades that are hinged at the central body equipped with a front shock absorbing system. Incidence (longitudinal pitch angle) adjustable by means of a mechanical - manual system (third upper point) or, on request, by an automatic hydraulic system.
The VMR V-plow is equipped with end-stroke mechanical stops in positions of maximum inclination (to protect the hydraulic cylinders for the blades handling). Nitrogen accumulator to reduce the side shock loading installed on the hydraulic circuit of the cylinders for the blade’s movements, combined with overpressure valves and with bottom rubber splashguards on which are fitted the cutting edges. Mechanical coupling system of the DIN plate with the central body, which allows a transverse pitch angle of + 5°, with automatic horizontal locking of the equipment lifted from the ground, in motion. Painted with special anti-rust treatment and final paint RAL 2011 (orange). R2 pipes with fittings and unified quick couplings. The V-plow modes: “V” mode (angle 90°), blade inclined completely to the right or left (angle 45°) and reverse wedge (scoop mode) with internal angle of 40°, in addition to all intermediate positions.
Hydraulically driven, through hydraulic double-effect cylinders for the independent movement of every single blade and for lifting/lowering procedures.
24 Volt electro- hydraulic power unit installed, on request (optional), on the snowplow. As an alternative option, a special hydraulic system installed on the vehicle (3 double-effect distributors required, one with a floating position).
Control of the plow by means of the electronic push-button panel, with cable of appropriate length, and of the electro-hydraulic unit. As an alternative option, commands already present on the vehicle if equipped with a special hydraulic system (ex. agricultural tractor).
Warning poles, nitrogen accumulator, upper tie-rod adjustable (3rd point), wear resistant steel cutting edge, anti-shock system with lower bumpers.
DIN attachment plate with central ring (1200 x 600 mm) equipped with 4 mechanical bolts, Led side-marker lights, pivoting and adjustable in height slides, pair of additional lights with support on the DIN plate, electro-hydraulic control unit equipped with cable and push-button panel, hydraulic double-effect cylinder to set/modify the longitudinal pitch angle (Incidence), rubber splashguard, bipolar electric cable with protection fuse to connect the control unit to the battery of the vehicle, possible processing techniques on the vehicle.
For further information on the VMR plow and for a custom-made offer do not hesitate to directly contact us or fill the "Contact" form on this page!
|Code||Model||Weight (kg)||Weight with control unit (mt)||Max transfer width (mt)||Working widths (mt): wedge / blade||Height (mm): at the tip / wingtip|
Phone: +39 059.931483
Sign up for our newsletter to stay informed and be updated on all the news!