TUNNEL ROTATING JETSWASHING ARM BLT GR - For tunnel washing system
Washing high pressure bar totally made of stainless steel AISI 304, built with tubular framework allows the passage of water at a very high pressures, also maintaining an excellent structural strength. The bars can be realized, according to the specific demands of the customer and can be equipped with articulated joints for the closure of the ends, useful during the transfer operations (always returning to the silhouette to the vehicle), the opening and closing may be controlled by cylinders hydraulic or electrical actuators (12 / 24V) .Trough the rotary action of special rotating jets and the pressure given by the water pump (mounted on the rear module) an optimal washing is guaranteed on any type of wall.
Washing tunnels, soundproof walls, vertical walls, windows and street signs.
Characteristics WATER REQUIREMENTS
AREA OF WASHING BAR LENGTH N ° NOZZLE FLOW MIN. P. MIN. P. MAX.
2000 mm 2000 mm 16112 l / min 100 bar 160 bar
3000 mm 3000 mm (1 + 2) 24 168 lt / min 100 bar 160 bar
4000 mm 4000 mm (1 + 2 + 1) 32 224 l / min 100 bar 160 bar.
WHAT ARE THE ADVANTAGES OF WASHING WITH NOZZLES HIGH PRESSURE COMPARED TO BRUSH?
Speed . The operating speed with these nozzles can be put at least 50% higher than the operating speed brush.
Management costs . The nozzles have a management cost at that null, while the brushes should be replaced every 50-80 hours of work.