SWEEPERS SPC - Street sweepers for tractors, road sweepers for working vehicles
Bearing body consists of tubular steel sheets and steel. Structure in Rapid mounting steel choice for:
front / rear lift with three tractor points - quick coupling DIN 76060 - Quick hook for front loaders, machines or telescopic arms. Ability to roll right angle sweeping through a mechanical rod or hydraulic cylinder (optional). The body of the sweeper in the operating phase on the road surface, is supported by 2 or 3 wheels pivoting rubber (third rubber is bound by the presence or absence of the front wallet for the collection). The sweeping roller consists of interchangeable rings of 600 mm diameter, the ring can be supplied in plastic material, or mixed in steel. The ground pressure of the brush roller is that the side brush is adjustable by means of two cranks, positioned at the two ends of the sweeper.
A shape of a parallelepiped, is made of welded sheet steel continuous wire, it hinged in the front of the sweeper, whose opening and closing is served by a double acting hydraulic cylinder.
Dust suppression system
Composed of watering bar in stainless steel, equipped with interchangeable nozzles, 12V / 24V electric pump and polyethylene tank fixed through bolted frame on the body of the sweeper.
N° 2 hydraulic motors for the operation of the roller brush and the side brush, flow rate regulating valve for regulating the speed of rotation of the roller brush and the side brush, pipes for opening / closing collection container, tubing for raising / lowering sweeper (DIN 76060), piping for tilting.
Front sweeping machine suitable for cleaning of the roadway, and in private areas such as construction sites, parking lots etc.
Suitable for the application of more than 60 hp tractors, backhoe loaders, wheel loaders, trucks with PPT> 3.5 T with independent hydraulic system.